The application of coolant system has been very common.For example, pharmaceutical chemical industry, refrigeration, HVAC, heat pump and other systems.As the leading enterprise of domestic coolant carrier, glacier coolant has been supplied by more than 2000 enterprises, including new projects and transformation projects. The use effect has been highly praised, but the energy consumption in the use process is different. The owner often mentions the matter of energy consumption. Through our field investigation and analysis, we provide the owner with some opinions on energy conservation and emission reduction.
The first control point is mainly in the design stage. It is necessary to design a matching coolant system according to the physical properties of the refrigerant, so that the coolant pump, refrigeration compressor and end heat exchange can operate at the most efficient point. Such a system is the best for energy saving.This method is only suitable for new projects or projects with complete refrigeration system transformation.
The second control point is the selection of coolant. The design institute has little understanding of the physical properties of coolant. Generally, the physical parameters of ethylene glycol or brine are queried, and the parameters obtained are often insufficient, which will have a certain impact on the calculation.Finally, there will be high energy consumption in the process of operation.The energy consumption of the reconstruction project is generally high, so it is particularly important to select a suitable coolant, which can directly reduce the energy consumption. It is not an exaggeration to say that it is also possible to save 50% energy.
The third control point is the daily operation and maintenance. During the operation process, there are often gases entering the system. The filter or system impurities lead to the increase of system operation energy consumption, which requires regular maintenance.The physical parameters of the coolant need to be tested every year and adjusted in time to ensure the stable and efficient operation of the system.
The operation energy consumption of the coolant system is a whole process control, and each link needs to control the energy consumption.
Under the concept of carbon neutralization, the cooling system also needs fine control.This process requires a close combination of the design unit, the owner and the coolant manufacturer. As a coolant manufacturer, glacier coolant provides cooling system solutions to track the whole process of the project and realize energy conservation and emission reduction of the system.