激光切割机专用防冻液

Laser Machine Antifreeze

激光切割机专用防冻液

Laser Machine Antifreeze

Instruction

Extremely cold weather or low temperature will cause damage to the optical part of the laser. And it is difficult to repair. Therefore, at low temperatures, the water in the water tank should be drained and replaced with a special antifreeze. Our laser machine special antifreeze is a light-colored liquid. The product uses M3 ultra-film anti-rust technology and Modify2000 composite modification technology, which has excellent anti-freeze, anti-boiling, anti-corrosion, and anti-scaling functions. There is no need to add other rust inhibitors during use, and it can be directly diluted by adding water according to a certain proportion according to the temperature. The minimum freezing point can reach -50ºC.

How to Use

  1. Drain the cooling water in the equipment completely.
  2. Dilute the antifreeze solution with water at a certain ratio. The ratio should be based on the local annual minimum temperature and the actual use situation. The freezing point-concentration comparison table is as follows.
激光切割机专用防冻液 表格

3. Add the antifreeze to the device.

 

Note: Excessive pressure of the gas used for drainage may damage the laser. All cooling water in the laser, laser output head, processing head and chiller must be drained cleanly to effectively protect the entire water cooling pipeline and related components.

Precautions

  1. This product is for industrial use only.
  2. Keep the container sealed when this product is not in use.
  3. This product should be used with water at a certain ratio. The original liquid is flammable when exposed to open flames and high heat. It is non-flammable when diluted to a certain ratio. Before use, please read the material safety data sheet (MSDS) and safety labels, and use the product according to the requirements and precautions in the safety data sheet.
  4. This product is an industrial product. Do not eat. It is prohibited to come into contact with food and related products.