LM-8
LM-8
Composition and Properties
LM-8 is composed of modified organic acid salt. The main additives include corrosion inhibitors, solubilizers, stabilizing agents, and water stabilizer. Appearance is light-colored liquid. Density is 1.334~1.360g/cm³ at 20°C. Specific heat is 0.622cal/g·°C. Viscosity is 2.9mPa·s(cP). Heat conductivity is 0.47W/m·K. Boiling point above 110°C, and freezing point below -60°C. No flash point, low volatile, non-flammable, low toxicity.
Purpose and Usage
LM-8 coolant has low toxicity, non-flammable, strong cooling capacity, high heat ability, good anti-rust performance advantages.
Temperature range: -50°C ~ 100°C
LM-8 coolant can use as replacement of the traditional aqueous calcium chloride solution.
How to use: Clean the system before use, and then use directly. Do not mix with other coolant. Check the PH every 3 months. If the PH value is lower than the specified value, please contact us to adjust.
Pharmaceutical
Chemical
HVAC
Aerospace
