LMT corrosion and scale inhibitor
LMT corrosion and scale inhibitor
Composition and Properties
LMT corrosion and scale inhibitor product is composed of organic acid salts and inorganic acid salts such as rust inhibitors, corrosion inhibitors, scale inhibitors, bactericidal and algicidal agents. It is a light-colored liquid with an active composition of about 30% and a pH value of ≥7.0.
Product features
- Improved corrosion protection
- Effectively inhibit the generation of scale
- Hard water stability to enable use with local tap water
- Compatible with commonly used metals and rubbers
- Long service lifetime, lowering maintenance cost
Recommended Usage
LMT corrosion and scale inhibitor is used in circulating water systems of chemical industry, medicine, internal combustion engine cooling . It can be directly added to the circulating water system, and the amount is about 1% of the water capacity of the system. The selection of circulating water shall be determined according to the technical requirements of the design documents. If no requirement is lower than the local tap water standard, the water used for the internal combustion engine coolant configuration shall be Takasumi deionized water.
Recommended use temperature range: 5℃ to 95℃.
Packaging and Storage
LMT corrosion and scale inhibitor is available in 25kg plastic drums.
This product is nonflammable, sealed and protected from light, and has a storage period of two years